英语ppt演讲稿(精选多篇)范文

第一篇：英语ppt演讲稿

吉他唱歌then,i am going to share the experience of learning guitar and singing songs.to be honest ,i am not good at either of them, i just like them. singing can be used to relieve my fatigues and can help me improve my accent. practicing guitar making me happy when i am sad. my hobbies refer to

music, it said that singing along with music or dancing to rhythm can make people clever. i am always singing at home to share each other’s joys and sorrow in our life and to learn many songs.

泼水节it goes without saying that there are many different kinds of activitiesand they can not only broaden our minds but also add more fun to our life.for example , thailand water splashing festival ,it represents thailand thai new year, the water-splashing festival is in mid-april and lasts three to five days. water is the most precious thing to the tai people,they believe the holy water make you get rid of bad luck,the tai people's wish for your good fortune and happiness sincerely.

印尼美食节in the indonesian food festival , we satisfy our taste buds,also, we feastedour eyes on the he traditional dances, songs and music.

风雅中华and the “feng ya zhong hua” is china traditional

culturalquiz. we had a chance that enabled our to presen our knowledge and practice ourcooperative learning skills.

五缘水乡 it is a wetland park.where we can see manyblack swans . it is surrounded by verdant trees on

in its the lakeside and intoxicates tens ofthousands of people arms with their wonderful charm and

its radiant and enchanting scenery in lake water.you can learn much during your travel about the geography, biology, and history of the(谢谢你访问好范文wWW.hAOWoRD.COM) places you visit. 小结no matter how well educated you are, there is always a lot for you to learn through travelling. the knowledge acquired from travel, as you will have found in your life, is no less valuable than that from any influential reference book.

第二篇：英语ppt演讲稿

to make a better city, planners aimed at creating a city in which the insalubrious environment and social structure would be defeated by a reordering of physical and social arrangements, so that all the citizens could attain the benefits of beauty, community, and democracy. in harvey’s opinion, the better city should confront on the postmodernist challenge to political economy, and deal with environmental sustainable.

however i think green buildings could make good cities, and also citizens will have a best quality of life. according to the world green building council’s definition, “to significantly reduce or eliminate the negative impact of buildings on the environment and on the building occupants, green building design and construction practices address: sustainable site planning, safeguarding water and water efficiency, energy efficiency, conservation of materials and resources, and indoor environmental quality.”the green building, which is sustainable in the built environment, can reduce environmental impact but also provide better buildings. the technologies associated with green buildings include:

-energy conservation

-water conservation

-material selection

-use of renewable materials

-occupant health and indoor environment quality

-site ecology

-recycling

the green building can be residential, commercial, retail and industrial buildings. for example, the green building uses water-mining plant to recycle water on toilet flushing, watering the garden, and washing cars. the building also uses phase-change materials for cooling, automatic night-purge windows, wavy concrete ceilings, which saves a lot of money and become more sustainable.

the idea of green and healthy cities is becoming more important nowadays. the better city should be planed for health and well-being by planners, and they will mainly focus on service facilities, educations. the good city will also need to be safe in community, and make community more walkable, and has an urban design with exquisite streetscape. however the planner keeps developing new ideas of how cities should be changed, therefore the city will become more livable and sustainable in the future.

reference:

susan s. fainstein, can we make the cities we want? the urban movement

richard reed and sara j. wilkinson (oct, 2014) green building-issues for the valuation process, uiversity of melbourne

第三篇：英语ppt演讲稿

to make a better city, planners aimed at creating a city in which the insalubrious environment and social structure would be defeated by a reordering of physical and social arrangements, so that all the citizens could attain the benefits of beauty, community, and democracy. in harvey’s opinion, the better city should confront on the postmodernist challenge to political economy, and deal with environmental sustainable.

however i think green buildings could make good cities, and also citizens will have a best quality of life. according to the world green building council’s definition, “to significantly reduce or eliminate the negative impact of buildings on the environment and on the building occupants, green building design and construction practices address: sustainable site planning, safeguarding water and water efficiency, energy efficiency, conservation of materials and resources, and indoor environmental quality.”the green building, which is sustainable in the built environment, can reduce environmental impact but also provide better buildings. the technologies associated with green buildings include:

-energy conservation

-water conservation

-material selection

-use of renewable materials

-occupant health and indoor environment quality

-site ecology

-recycling

the green building can be residential, commercial, retail and industrial buildings. for example, the green building uses water-mining plant to recycle water on toilet flushing, watering the garden, and washing cars. the building also uses phase-change materials for cooling, automatic night-purge windows, wavy concrete ceilings, which saves a lot of money and become more sustainable.

the idea of green and healthy cities is becoming more important nowadays. the better city should be planed for health and well-being by planners, and they will mainly focus on service facilities, educations. the good city will also need to be safe in community, and make community more walkable, and has an urban design with exquisite streetscape. however the planner keeps developing new ideas of how cities should be changed, therefore the city will become more livable and sustainable in the future.

reference:

susan s. fainstein, can we make the cities we want? the urban movement

richard reed and sara j. wilkinson (oct, xx) green building-issues for the valuation process, uiversity of melbourne

第四篇：专业英语ppt演讲稿

1、lathe [leie]

2、value of two yuan of the third series of the rmb ——the turner

3、a lathe is a machine tool which rotates the workpiece on its axis to perform various ['vε?ri?s] operations such as cutting, sanding(砂磨), knurling['n?:li?] (滚花), drilling, or deformation with tools that are applied to the workpiece to create an object which has symmetry['simitri] (对称) about an axis of rotation.（center lathe，vertical lathe）

4、history

the lathe is an ancient tool, dating at least to ancient egypt ['i:d?ipt] and known and used in assyria [?'siri?] and ancient greece [ɡri:s].

the origin ['?rid?in, '?:-] of turning dates to around 1300 bc when the ancient ['ein??nt] egyptians [i:'d?ip??nz] first developed a two-person lathe. （one person would turn the wood work piece with a rope while the other used a sharp tool to cut shapes in the wood.） ancient rome improved the egyptian design with the addition of a turning bow. in the middle ages a pedal replaced hand-operated turning, （freeing both the craftsman's hands to hold the woodturning tools. the pedal was usually connected to a pole, often a straight-grained sapling.） the system today is called the "spring pole" lathe. spring pole lathes were in common use into the early 20th century.

during the industrial revolution, mechanized ['mek?naizd] power generated by water wheels or steam engines was transmitted to the lathe via line shafting,( allowing faster and easier work. metalworking lathes evolved into heavier machines with thicker, more rigid parts.) between the late 19th and mid-20th centuries, individual electric motors ['m?ut?] at each lathe replaced line shafting as the power source. beginning in the 1950s, servomechanism[,s?:v?u'mek?niz?m, 's?:v?u,me-] (伺服机构) were applied to the control of lathes and other machine tools via numerical control, (which often was coupled with computers to yield computerized numerical control.) today manually controlled and cnc lathes coexist（共存） in the manufacturing industries ['ind?stri].

5、description：parts

explanation of the standard components of most lathes:

? bed床身: usually made of cast iron. provides a heavy rigid frame on which all the main components are mounted.

? ways床身导轨: inner and outer guide rails that are precision machined parallel to assure accuracy of movement.

? headstock['hedst?k]床头箱，主轴箱: mounted in a fixed position on the inner ways, usually at the left end. using a chuck, it rotates the work.

? gearbox ①齿轮箱②变速器: inside the headstock, providing multiple speeds with

a geometric ratio by moving levers.

? spindle['spindl]心轴，主轴: hole through the headstock to which bar stock can be fed, which allows shafts that are up to 2 times the length between lathe centers to be worked on one end at a time.

? chuck卡盘: 3-jaw (self centering) or 4-jaw (independent) to clamp part being machined.

? chuck: allows the mounting of difficult workpieces that are not round, square or triangular.

? tailstock尾架: fits on the inner ways of the bed and can slide towards any position the headstock to fit the length of the work piece. an optional taper turning attachment would be mounted to it.

? tailstock quill[kwil]尾架套管: has a morse taper to hold a lathe center, drill bit or other tool.

? carriage托架，滑动架: moves on the outer ways. used for mounting and moving most the cutting tools.

? cross slide横刀架，横拖板，横溜板: mounted on the traverse slide of the carriage, and uses a handwheel to feed tools into the workpiece.

? tool post刀架，刀座: to mount tool holders in which the cutting bits are clamped. ? compound rest复式刀架: mounted to the cross slide, it pivots around the tool post.

? apron['eipr?n]床鞍: attached to the front of the carriage, it has the mechanism and controls for moving the carriage and cross slide.

? feed rod进给杆: has a keyway, with two reversing pinion gears, either of which can be meshed with the mating bevel gear to forward or reverse the carriage using a clutch.

? lead screw丝杠: for cutting threads.

? split nut开合螺母: when closed around the lead screw, the carriage is driven along by direct drive without using a clutch.

? quick change gearbox快换齿轮箱: controls the movement of the carriage using levers.

? steady rest固定中心架: clamped to the lathe ways, it uses adjustable fingers to contact the workpiece and align it. can be used in place of tailstock or in the middle to support long or unstable parts being machined.

? follow rest跟刀架: bolted to the lathe carriage, it uses adjustable fingers to bear against the workpiece opposite the cutting tool to prevent deflection.

6~9、description：accessories [?k'ses?ri]

three-jaw [d??:] chuck [t??k]: self-centering three-jaw chuck and key with one jaw removed and inverted showing the teeth that engage in the scroll plate. the scroll plate is rotated within the chuck body by the key, the scroll engages the teeth on the underside of the jaws which moves the three jaws in unison, to tighten or release the workpiece.

four-jaw chuck :independent four-jaw chuck, also known as a universal chuck, with the jaws independently set. the key is used to adjust each jaw separately. collet弹性夹头: a collet ['k?lit] is a holding device—specifically, a subtype of chuck—that forms a collar around the object to be held and exerts a strong clamping force on the object when it is tightened, usually by means of a tapered outer collar. it may be used to hold a workpiece or a tool.

faceplate花盘: a lathe faceplate is the basic workholding accessory for a wood or metal turning lathe. it is a circular metal (usually cast iron) plate which fixes to the end of the lathe spindle. the workpiece is then clamped to the faceplate, typically using t-nuts in slots in the faceplate, or less commonly threaded holes in the faceplate itself.

dead center死顶尖: dead center (the conical piece) mounted in the spindle of a lathe and being used to support a workpiece being driven by a carrier setup live center活顶尖:a live center or revolving center is constructed so that the 60° center runs in its own bearings and is used at the non-driven or tailstock end of a machine.[2] it allows higher turning speeds without the need for separate lubrication [,lu:bri'kei??n], and also greater clamping pressures.

lathe carrier['k?ri?]车床鸡心夹头: a lathe dog, also known as a lathe carrier, is a device that clamps around the workpiece and allows the rotary motion of the machine's spindle to be transmitted to the workpiece.

mandrel['m?ndr?l]心轴: an object used to shape machined work.

10、application

lathes are used in woodturning, metalworking, metal spinning（旋压）, and glass-working. lathes can be used to shape pottery, the best-known design being the potter's wheel陶车. most suitably equipped metalworking lathes can also be used to produce most solids of revolution, plane surfaces and screw threads or helices. ornamental [,?:n?'ment?l] lathes can produce three-dimensional solids（实体）of incredible complexity

11、examples of work produced from a lathe

12、thank you!

i`m very happy to have this opptunity to give you a talk.today,my topic is lathe.

i know many of you are familiar with this topic

can you hear me clearly?

i think ti would be best to start out by looking at the picture on the screen

i would like to talk about first is the definition of the lathe

question ['kwest??n]

that is all,thank you very much

do you have any questions? please show me your hand.

who else?

i think we have time for just one more question

第五篇：中国功夫英语ppt演讲稿

traditional martial arts are part of china's outstanding culture and it contains the spirit of the chinesenation-specific values, way of thinking, imagination, which embodies the chinese nation's vitality andcreativity, and intelligence are the crystallization of the chinese people, but also a treasure for allmankind civilization.

the origin of chinese martial arts 中国武术的起源

wushu in china goes back to ancient times, originating from productive laboring of the ancient ancestry.

in the primitive society, people had to survive by gathering in groups. they lived on hunting with rocks and sticks. hitting with their hands, kicking with their feet and cutting, chopping or stabbing with simple weapons, they performed all kinds of movements, which displayed certain skills of defense or attacking. these performances made up the substantial background of wushu.

in the clan [kl?n] society, there often occurred battles between the tribes. armed forces became the means of plundering. bows, arrows, casting stones and other rocky items appeared as weapons, being improved gradually according to the needs of fight. when having a rest, especially when celebrating their triumphs, people danced to the imitations of defending and attacking movements, stabbing, blowing and kicking. after prolonged accumulation, the experiences began to be raised to the level of consciousness, hence wushu came into being.

type of gongfu中国武术的分类

chinese martial arts consist of a number of fighting styles that were developed over the centuries. those fighting styles can be classified according to common themes that are identified as "families" (家), "sects" (派) or "schools" (门). styles of chinese martial arts also can be categorized as the northern style and the southern style according to the geographical regions divided by the huanghe river.

chinese love for martial arts中国人的武侠情缘

chinese love for martial arts can be reflected in many martial arts novels and all kinds of film and television works.

the works of jin yong, gu long, liang yusheng is representative of martial arts novels. recent years, a lot of martial arts writers appear on the mainland. for example, feng ge, the writer ofkun lun(昆仑 )and cang yue, the writer oftingxuelou series, who are the representativeof new martial arts writers. it is said that “outstanding martial arts novelist to write the world faces; and astute readers read out the vicissitudes of life and attitudes of human.” we may not be the astute readers, but we can at least enjoy martial in our own way. superb and legendary martial arts, peculiar experience of a survivor, a love story full of pathos attract many readers.

martial arts film and television works are emerging.

中国武术精神 the spirit of the chinese martial arts

1个人的武德修养 individual cultivation of martial arts ethics.

the practicers should respect teachers, filial piety, and righteousness and should not belligerent.

2 collective morality.集体的道德观念。

the practicers should help the poor and the weak, solve villainous crimes and righteous.

3爱国主义的精神。the spirit of patriotism

all the practicers must loyalty to the nation. the goal they practice martial arts is to protect the country and the people.

武术对世界的影响

chinese gongfu is a very important and unique form of chinese culture. it can be viewed as both a popular and a classical art. today it is very common and widespread. chinese gongfu possesses an important and extensive cross-cultural跨文化的 significance. the popularity of chinese gongfu, including taijiquan, qigong, etc. is not limited to china but has become a worldwide phenomenon. we can also enjoy some kongfu movies directed by foreign directors at times!

in the future, we hope more people could interest in our chinese culture and have a depth knowledge of chinese kongfu.